| Falling weight | 9.1kg±0.46kg (20±1 lb) and 10kg |
| Impact height | 610 mm and 1000mm (The limit can be adjusted freely) The maximum test height is 1000mm |
| Height display | Through the altimeter display, accurate ±5mm |
| Impact mode | The falling ball is lifted to a certain height and released. The falling ball falls freely in the vertical direction without
tilting or shaking |
| Horizontal bar | 15.8±0.2m(5/8 in) steel bar |
| Interior material | SUS #201 stainless steel plate, 1/3 of the place with iron fluorine adhesive tape, high temperature resistance, corrosion
resistance, insulation easy to clean |
| Outer box material | Cold-rolled plate paint treatment, thickness of 1.5mm |
| Air vent | It is located on the back of the box, with a diameter of 100mm and an external diameter of 110mm exhaust duct, which is convenient
for external high-power exhaust fan in the laboratory |
| The maximum battery size can be measured | 250*250*250mm |
| Box door | Single door, toughened glass observation window on the door, cold handle door lock, box door with silicone foam pressing strip |
| Upper and lower impact surface | 45# steel paint treatment; Thickness 15mm |
| Protective device | Upper and lower limit protection switch, safety stop, located at the bottom of the weight, to protect in case of sudden power
failure |
| Lighting installation | Easy to observe the state of the test |
| Visual window | 250mm*250mm |
| Use power supply | 1∮， AC220V, 3A |
| Power supply | 700W |
| Weight (approx) | About 150kg |
| Volume product (approx) | 700x800x1650mm (Length x width x height) |
