| 1, each layer of test box size: 500*500*500mm (length* width *height);(can also be customized according to customer requirements) | |||||||
2, material: outer box: 1.5mm thick A3 steel plate and paint treatment, inner box: SUS#201 thickness 1.2mm; | ||||||||
3, single door, left open, the inner door is made of stainless steel, and add silicone force strip, the door is open with an observation window; | ||||||||
Technicalparameter | 4, the door is connected with the box body by a strong hinge, anticooling handle door lock; | |||||||
5, the test box inside with teflon tape, effective insulation and effective flame retardant, easy to clean; | ||||||||
6. The right side of each box is provided with a circular wire installationport, which is convenient to test the connecting line through; | ||||||||
7, there is a separate test panel to control the lighting and exhaust in each test room. | ||||||||
Installation requirements | 1. Ambient temperature: 25±5°C; | |||||||
2, relative humidity: 45-85%RH; | ||||||||
3, atmospheric pressure: 86-106KPa; | ||||||||
4, no direct sunlight or other heat source direct radiation; 5, no strong vibration around; |