| Pressure capacity | 2T/20KN |
| manometer | Manual pressure adjustable, pressure gauge adjustment accuracy 5% [pressure = pressure/pattern area] |
| Platen Size (mm metric) | 200*200/250*250/300*300/350*350 [mm] |
| Hot press plate material | High temperature resistant imported steel plate, surface carbonization quenching, special treatment of fast heat conduction,pressure parallel type, wear-resistant |
| Platen hardness | 50～60HRC |
| Flatness of the platen | ≤0.03 mm |
| Platen parallelism | ≤0.16 mm |
| Temperature range | Room temperature -250℃ [can be customized maximum temperature of 500 degrees] [select a price list shall prevail] |
| Temperature uniformity | 1.5℃ [The larger the plate, the higher the temperature, the worse the temperature uniformity] |
| Temperature controller | Precision module, with Omron digital display numerical display. |
| Temperature control mode | PID precise control, self-tuning with high-precision sensor, temperature control accuracy: ±1.0℃. |
| timepiece | LED digital Settings display, time range 0.1S ~99min~9.9hr |
| heater | Heating mold built-in cylinder [According to the platen area configuration of different power packaging platen temperature uniformity, not the same power] |
| Warming time | It takes about 15min from room temperature to 160℃ |
| Two hot plates | Each hot plate can be set to control the temperature |
| Heating method | Electric heating |
| Cooling mode | Natural air cooling |
| Barometric system | Air pressure control system, air driven high-precision cylinder without resistance of the piston to perform lifting smoothly; Manual pressure, pressure retention, pressure relief. |
| Cylinder stroke | Max. 120mm |
| Cylinder speed | 11mm/s |
| manometer | 0~100kg/sq.cm【 Suitable range for actual pressure 】 |
| Mold opening mode | Manual ascent and descent |
| Main engine volume | (WXDXH)500×560×650 mm |
| Supply voltage | 3∮, AC220V |
| Air source | 0.5 ~ 0.7 mpа |
| Machine weight | ≈160kg |
| Foot cup | four |
