Nominal force of electric cylinder: | 5KN |
Equipment displacement accuracy: | The 0.01 mm |
Rated speed: | No-load speed: 10-100/S pressing speed: 0.1-20/S |
Repeatability of measuring equipment pressure: | Plus or minus 0.5% F.S |
Spindle to body depth: | 105mm |
Upper head mounting hole size: | Diameter 15 |
Effective area of table: | 290*210mm |
Mode selection: | Position mode: constant speed, set the absolute position to reach the press stop; Pressure mode: constant speed, relative pressure to press stop; |
Procedure: | Program parameter store Settings |
Curve: | On-line pressure curve output |