Test purposes This testing machine is mainly used for overcharge and overdischarge of the battery. During the charge and discharge test, the battery is placed in an explosion-proof box and an external charge and discharge tester is used to protect the operator and the instrument. The test box of this machine can be tested according to the test requirements. Make customized.
Applicable standards
GB 31241-2014 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"
GB/T 18287 -2013 "General Specification for Lithium Ion Batteries for Cellular Phones" External short circuit requirements
UN38.3(2012) "Recommendations on the Transport of Dangerous Goods-Manual of Tests and Standards" Part III
IEC62133-2012 "Safety requirements for batteries and battery packs containing alkaline or non-acid electrolytes"
IEC 62281 2006 "Safety requirements for lithium primary batteries and accumulators in transportation"
IEC 60086 2007 "Primary Batteries Part 6 Safety Requirements for Lithium Batteries"
Installation requirements
1. Ambient temperature 25±5℃;
2. Relative humidity 45-85%RH;
3. Atmospheric pressure 86～106KPa;
4. No direct sunlight or direct radiation from other heat sources;
5. There is no strong vibration around;
