This rain test equipment is a non-standard equipment. The artificial rain test chamber is used for external lighting and signal devices and automobile lamp housing protection. It is a necessary testing equipment in the fields of aerospace, automobile and motorcycle, electrical engineering and electronics, home appliances, scientific research and so on.
Safety protection system
1. Self-protection, three voltage phase loss, phase sequence protection to prevent the pump from reversing. 2. Time accumulator to prevent accidental interruption of the test and to know the interruption time 3. Motor overload protection device 4. Equipment overcurrent protection device 5. With fuse-free protection switch 6. When the temperature is over, the water level is low, the machine warning light will indicate, and it will automatically stop. When the fault is not eliminated, it cannot be turned on 7. Water pressure overload protection switch 8. Pump overload protection switch 9. The motor is equipped with an overcurrent protector 10. Alarm buzzer 11. Chinese indication screen of failure point
Power supply and environmental requirements
1. Power supply: 380V 3-phase 4-wire 50Hz 2. The ambient temperature around the machine is maintained at +5~+35℃. 3. There must be a water source (ordinary tap water) and a drainage pipe.
Scope of application
This full product meets GB 2423.38-90 "Basic Environmental Test Regulations for Electrical and Electronic Products Test R: Water Test Method", GB/T10485-2007, strictly in accordance with the low-voltage electrical enclosure protection IPX3...IPX4... level GB/T4942.2 -93, GB 4208-93, GB 4706, GB 7000 and other corresponding national standards and technical parameters design and manufacture of other related standards. Can carry out the water test specified by the corresponding standard