1. It is applicable to the waterproof grade test of IPX1, IPX2, IPX3, IPX44k, IPX5, IPX66k and IPX9k. 2. The shell is made of domestic high-quality steel plate, and the surface is sprayed with baking varnish, which is beautiful and durable.
3. The inner box, rotary table and swing tube are all made of SUS304 # stainless steel plate to ensure no rust after long use.
4. Box structure; With water tank and circulating water; The water level float valve is installed in the water storage tank to automatically control water inflow, and low water level alarm detection is provided.
5. There is a transparent observation window (made of tempered glass) on the door, and LED lights are installed in the box to facilitate the observation of internal testing.
6. IPX12: The drip tank is vacuum designed and made of stainless steel; The contact position of the nozzle adopts the tapered design of brass, which is convenient for installing the spray nozzle.
7. IPX12: It has the function of compressed air drying. After the test, the excess water in the drip box can be removed to avoid blocking the pinhole due to ponding and scaling. (Note: the user is required to provide air source)
8. IPX344k6k: The swing tube drive adopts domestic high-quality servo stepping motor, the swing tube speed and angle are accurate and adjustable, and there is no out of step problem (out of step: it will cause the swing tube to act abnormally, hit the middle turntable shaft, and cause equipment damage)
9. Filtering measures: standard high-precision filter can effectively filter impurities in tap water; The filter element can be replaced regularly.
10. Turntable drive: domestic high-quality stepping motor is used, the speed and angle can be set (adjustable) on the touch screen, accurate and stepless within the standard range, and can automatically control the forward and reverse rotation (forward and reverse rotation: suitable for power on test with samples to prevent winding).
11. The test chamber is equipped with a sample power socket (AC220,10A). The power on and power off time of the sample power can be controlled through the program: power off (0-999min) - power on (0-999min) - power off (0-999min), which is applicable to the power on and power off of the sample during the test.
12. The test time can be set on the touch screen, and the setting range is 0-999min (adjustable).
13. The core control system uses a 7-inch touch screen+PLC, and the electrical components are imported brands such as LG, Omron, etc. The wiring process meets the requirements of national standards. The electrical board layout is reasonable, the wiring is firm, and the markings are clear.
14. The chassis is equipped with an embedded spare parts box to place common spare parts (such as hexagonal screwdriver, filter element, needle, etc.) for the convenience of users' storage and use.